EWP115 Electric Water Pump and LCD EWP & Fan Digital Controller Combo KitNylon Housing30.4 Gallon Per Minute Flow Rate12-Volt Take total control of your engine cooling with the Davies Craig EWP115 Nylon Electric Water Pump and LCD EWP/Fan Digital Controller. The Controller will also manage the operation of your Thermatic Fan. The EWP115 (115 litres per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.The LCD EWP/Fan Digital Controller will manage both the EWP and Thermatic fan operation. The Digital Controller will vary the speed of the EWP in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency.The Thermatic Fan/s will be activated automatically once the engine coolant rises 5.4°F (3°C) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 14°F / 10°C below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life.The EWP115 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet. KIT CONTENTSDESCRIPTIONUNITSEWP115 Nylon 12 Volt Pump1EWP/FAN LCD Controller1Hose Clamps4Rubber Adaptor Sleeves4Wiring Harness (10A Fuse)1Inline Adaptor1EWP115 Combo Hardware Bag1Instructions1 Technical Specifications EWP115Voltage12 Volt PumpOperating Voltage3V DC to 15V DCMaximum Current10A @ 13VFlow Rate (Max)115 L/min (30.38 US gal/min) @ 13V DCOperating Temp.-40° to 130°C (-40° to 266°F)Pump DesignClockwise centrifugal with volute chamberPump...